1U 2-slot/4-slot Expansion Enclosure, PCIe 3.0
For OEM customers only.
Please call the factory for pricing information.
Please see Appliances for this product preconfigured.
The 1U Gen3 expansion enclosure supports two double-wide, full-length or four single-wide GPU's or other high-performance PCIe cards. It includes a PCIe x16 cable adapter and 1-meter cable.
Add high performance PCIe I/O cards to your server with the Gen3 expansion enclosure. It supports two double-wide, full-length or four single-wide PCIe cards by simply installing the cable adapter in your server's PCIe x16 slot. You can add a combination of high-performance GPU, RAID controller, NAND Flash card, and FPGA card to your system. Each slot in the expansion enclosure operates at 128Gb/s for Gen3 and at 64Gb/s for Gen2, so all cards in the enclosure are fully supported. A 1620-watt power supply, one PCIe x16 cable adapter, and a 1-meter cable are included. No additional software is required.
|Enclosure||1.75”H x 17”W x 22.25” D Front Panel LED One Rear panel PCIe x16 interface|
|Capacity||Up to two double-wide PCIe x16 cards|
|Power Supply||1620W power supply (internal)|
|Expansion||PCIe x16 1-meter cable PCIe x16 Gen3 cable adapter|
|Cooling||Eight 30 CFM fans (removable)|
|Operating Environment||0-35°C 10-90% relative humidity 0-10,000 feet above sea level|
|Storing Environment||-40 to 85°C 5-96% relative humidity 0-50,000 feet above sea level|
One Stop Systems warrants this product to be free of defects in material and workmanship for the warranty period purchased by the customer (1 to 5 years) from OSS beginning on the date of delivery to the original purchaser from OSS . During this period, One Stop Systems will, at its option, repair or replace this product at no additional charge to the purchaser, except as set forth in this warranty agreement. OSS will, at its option, repair or replace this product at no additional charge to the purchaser, if the defect is related to the OSS manufactured product. OSS is not liable for any defects in material or workmanship of any peripherals, products or parts, which OSS does not design or manufacture (third party products). OSS will honor the original manufacturer’s warranty on these products. One Stop Systems will analyze the defective component and the customer will be charged only in the following instances:
- No problem found: $125(U.S dollars)
- Damage Due to Negligence or Mishandling: Parts and labor at $75 per hour with a $100 minimum charge (U.S. dollars). Receipt of damaged goods voids the One Stop Systems warranty.
Repair parts and replacement products will be furnished on an exchange basis and will be either new or reconditioned. All replacement parts and products shall become the property of OSS, if such parts or products are provided under this warranty agreement. In the event a defect is not related to the OSS manufactured product or is not covered by the third party product, OSS shall repair or replace the defective parts at the purchaser’s cost and deliver the defective parts to the purchaser. This limited warranty shall not apply if the product has been misused, carelessly handled, defaced, modified or altered, or if unauthorized repairs have been attempted by others. The above warranty is the only warranty authorized by OSS and is in lieu of any implied warranties, including implied warranty of merchantability and fitness for a particular purpose. In no event will One Stop Systems be liable for any such damage as lost business, lost profits, lost savings, downtime or delay, labor, repair or material cost, injury to person or property or any similar or dissimilar consequential loss or damage incurred by the purchaser, even if OSS has been advised of the possibility of such losses or damages.
Depending on the warranty service level purchased, warranty service is obtained by advanced replacement when accompanied by a signed Warranty Service Agreement form or by delivering the product to an OSS authorized repair facility with all parts and accessories as originally shipped, along with the proof of purchase and a Returned Merchandise Authorization (RMA) number. The RMA number is obtained in advance from OSS Support or Customer Service Department and is valid for 30 days. The RMA number must be clearly marked on the exterior of the original shipping container or equivalent. Purchaser will be responsible and liable for any missing or damaged parts. Purchaser agrees to pay for shipping charges one way, and to either insure the product or assume the liability for loss or damage during transit.
Ship to: One Stop Systems
ATTENTION: RMA REPAIR DEPARTMENT
2235 Enterprise Street, Suite 110
Escondido, CA 92029